===================================================================
@@ 12475,7 +12475,7 @@
* MSP430 Builtin Functions::
* NDS32 Builtin Functions::
* picoChip Builtin Functions::
* PowerPC Builtin Functions::
+* Basic PowerPC Builtin Functions::
* PowerPC AltiVec/VSX Builtin Functions::
* PowerPC Hardware Transactional Memory Builtin Functions::
* PowerPC Atomic Memory Operation Functions::
@@ 15534,12 +15534,25 @@
@end table
@node PowerPC Builtin Functions
@subsection PowerPC Builtin Functions
+@node Basic PowerPC Builtin Functions
+@subsection Basic PowerPC Builtin Functions
The following builtin functions are always available and can be used to
check the PowerPC target platform type:
+@menu
+* Basic PowerPC Builtin Functions Available on all Configurations::
+* Basic PowerPC Builtin Functions Available on ISA 2.05::
+* Basic PowerPC Builtin Functions Available on ISA 2.06::
+* Basic PowerPC Builtin Functions Available on ISA 2.07::
+* Basic PowerPC Builtin Functions Available on ISA 3.0::
+@end menu
+This section describes PowerPC builtin functions that do not require
+the inclusion of any special header files to declare prototypes or
+provide macro definitions. The sections that follow describe
+additional PowerPC builtin functions.
+
+@node Basic PowerPC Builtin Functions Available on all Configurations
+@subsubsection Basic PowerPC Builtin Functions Available on all Configurations
+
@deftypefn {Builtin Function} void __builtin_cpu_init (void)
This function is a @code{nop} on the PowerPC platform and is included solely
to maintain API compatibility with the x86 builtins.
@@ 15643,6 +15656,8 @@
CPU supports the Embedded ISA category.
@item cellbe
CPU has a CELL broadband engine.
+@item darn
+CPU supports the @code{darn} (deliver a random number) instruction.
@item dfp
CPU has a decimal floating point unit.
@item dscr
@@ 15659,6 +15674,9 @@
CPU has hardware transaction memory instructions.
@item htmnosc
Kernel aborts hardware transactions when a syscall is made.
+@item htmnosuspend
+CPU supports hardware transaction memory but does not support the
+@code{tsuspend.} instruction.
@item ic_snoop
CPU supports icache snooping capabilities.
@item ieee128
@@ 15687,6 +15705,8 @@
CPU supports 64bit mode execution.
@item ppcle
CPU supports a littleendian mode that uses address swizzling.
+@item scv
+Kernel supports system call vectored.
@item smt
CPU support simultaneous multithreading.
@item spe
@@ 15718,19 +15738,81 @@
@end smallexample
@end deftypefn
These builtin functions are available for the PowerPC family of
+The following builtin functions are also available on all PowerPC
processors:
@smallexample
float __builtin_recipdivf (float, float);
float __builtin_rsqrtf (float);
double __builtin_recipdiv (double, double);
double __builtin_rsqrt (double);
uint64_t __builtin_ppc_get_timebase ();
unsigned long __builtin_ppc_mftb ();
double __builtin_unpack_longdouble (long double, int);
long double __builtin_pack_longdouble (double, double);
@end smallexample
+The @code{__builtin_ppc_get_timebase} and @code{__builtin_ppc_mftb}
+functions generate instructions to read the Time Base Register. The
+@code{__builtin_ppc_get_timebase} function may generate multiple
+instructions and always returns the 64 bits of the Time Base Register.
+The @code{__builtin_ppc_mftb} function always generates one instruction and
+returns the Time Base Register value as an unsigned long, throwing away
+the most significant word on 32bit environments.
+
+@node Basic PowerPC Builtin Functions Available on ISA 2.05
+@subsubsection Basic PowerPC Builtin Functions Available on ISA 2.05
+
+The basic builtin functions described in this section are
+available on the PowerPC family of processors starting with ISA 2.05
+or later. Unless specific options are explicitly disabled on the
+command line, specifying option @option{mcpu=power6} has the effect of
+enabling the @option{mpowerpc64}, @option{mpowerpcgpopt},
+@option{mpowerpcgfxopt}, @option{mmfcrf}, @option{mpopcntb},
+@option{mfprnd}, @option{mcmpb}, @option{mharddfp}, and
+@option{mrecipprecision} options. Specify the
+@option{maltivec} and @option{mfpgpr} options explicitly in
+combination with the above options if they are desired.
+
+The following functions require option @option{mcmpb}.
+@smallexample
+unsigned long long __builtin_cmpb (unsigned long long int, unsigned long long int);
+unsigned int __builtin_cmpb (unsigned int, unsigned int);
+@end smallexample
+
+The @code{__builtin_cmpb} function
+performs a bytewise compare on the contents of its two arguments,
+returning the result of the bytewise comparison as the returned
+value. For each byte comparison, the corresponding byte of the return
+value holds 0xff if the input bytes are equal and 0 if the input bytes
+are not equal. If either of the arguments to this builtin function
+is wider than 32 bits, the function call expands into the form that
+expects @code{unsigned long long int} arguments
+which is only available on 64bit targets.
+
+The following builtin functions are available
+when hardware decimal floating point
+(@option{mharddfp}) is available:
+@smallexample
+_Decimal64 __builtin_ddedpd (int, _Decimal64);
+_Decimal128 __builtin_ddedpdq (int, _Decimal128);
+_Decimal64 __builtin_denbcd (int, _Decimal64);
+_Decimal128 __builtin_denbcdq (int, _Decimal128);
+_Decimal64 __builtin_diex (long long, _Decimal64);
+_Decimal128 _builtin_diexq (long long, _Decimal128);
+_Decimal64 __builtin_dscli (_Decimal64, int);
+_Decimal128 __builtin_dscliq (_Decimal128, int);
+_Decimal64 __builtin_dscri (_Decimal64, int);
+_Decimal128 __builtin_dscriq (_Decimal128, int);
+long long __builtin_dxex (_Decimal64);
+long long __builtin_dxexq (_Decimal128);
+_Decimal128 __builtin_pack_dec128 (unsigned long long, unsigned long long);
+unsigned long long __builtin_unpack_dec128 (_Decimal128, int);
+@end smallexample
+
+The following functions require @option{mhardfloat},
+@option{mpowerpcgfxopt}, and @option{mpopcntb} options.
+
+@smallexample
+double __builtin_recipdiv (double, double);
+float __builtin_recipdivf (float, float);
+double __builtin_rsqrt (double);
+float __builtin_rsqrtf (float);
+@end smallexample
+
The @code{vec_rsqrt}, @code{__builtin_rsqrt}, and
@code{__builtin_rsqrtf} functions generate multiple instructions to
implement the reciprocal sqrt functionality using reciprocal sqrt
@@ 15740,43 +15822,85 @@
functions generate multiple instructions to implement division using
the reciprocal estimate instructions.
The @code{__builtin_ppc_get_timebase} and @code{__builtin_ppc_mftb}
functions generate instructions to read the Time Base Register. The
@code{__builtin_ppc_get_timebase} function may generate multiple
instructions and always returns the 64 bits of the Time Base Register.
The @code{__builtin_ppc_mftb} function always generates one instruction and
returns the Time Base Register value as an unsigned long, throwing away
the most significant word on 32bit environments.
+The following functions require @option{mhardfloat} and
+@option{mmultiple} options.
Additional builtin functions are available for the 64bit PowerPC
family of processors, for efficient use of 128bit floating point
(@code{__float128}) values.
+@smallexample
+long double __builtin_pack_longdouble (double, double);
+double __builtin_unpack_longdouble (long double, int);
+@end smallexample
Previous versions of GCC supported some 'q' builtins for IEEE 128bit
floating point. These functions are now mapped into the equivalent
'f128' builtin functions.
+@node Basic PowerPC Builtin Functions Available on ISA 2.06
+@subsubsection Basic PowerPC Builtin Functions Available on ISA 2.06
+The basic builtin functions described in this section are
+available on the PowerPC family of processors starting with ISA 2.05
+or later. Unless specific options are explicitly disabled on the
+command line, specifying option @option{mcpu=power7} has the effect of
+enabling all the same options as for @option{mcpu=power6} in
+addition to the @option{maltivec}, @option{mpopcntd}, and
+@option{mvsx} options.
+
+The following basic builtin functions require @option{mpopcntd}:
@smallexample
__builtin_fabsq is mapped into __builtin_fabsf128
__builtin_copysignq is mapped into __builtin_copysignf128
__builtin_infq is mapped into __builtin_inff128
__builtin_huge_valq is mapped into __builtin_huge_valf128
__builtin_nanq is mapped into __builtin_nanf128
__builtin_nansq is mapped into __builtin_nansf128
+unsigned int __builtin_addg6s (unsigned int, unsigned int);
+long long __builtin_bpermd (long long, long long);
+unsigned int __builtin_cbcdtd (unsigned int);
+unsigned int __builtin_cdtbcd (unsigned int);
+long long __builtin_divde (long long, long long);
+unsigned long long __builtin_divdeu (unsigned long long, unsigned long long);
+int __builtin_divwe (int, int);
+unsigned int __builtin_divweu (unsigned int, unsigned int);
+vector __int128_t __builtin_pack_vector_int128 (long long, long long);
+void __builtin_rs6000_speculation_barrier (void);
+long long __builtin_unpack_vector_int128 (vector __int128_t, signed char);
@end smallexample
+Of these, the @code{__builtin_divde} and @code{__builtin_divdeu} functions
+require a 64bit environment.
+
+The following basic builtin functions, which are also supported on
+x86 targets, require @option{mfloat128}.
+@smallexample
+__float128 __builtin_fabsq (__float128);
+__float128 __builtin_copysignq (__float128, __float128);
+__float128 __builtin_infq (void);
+__float128 __builtin_huge_valq (void);
+__float128 __builtin_nanq (void);
+__float128 __builtin_nansq (void);
+
+__float128 __builtin_sqrtf128 (__float128);
+__float128 __builtin_fmaf128 (__float128, __float128, __float128);
+@end smallexample
+
+@node Basic PowerPC Builtin Functions Available on ISA 2.07
+@subsubsection Basic PowerPC Builtin Functions Available on ISA 2.07
+
+The basic builtin functions described in this section are
+available on the PowerPC family of processors starting with ISA 2.07
+or later. Unless specific options are explicitly disabled on the
+command line, specifying option @option{mcpu=power8} has the effect of
+enabling all the same options as for @option{mcpu=power7} in
+addition to the @option{mpower8fusion}, @option{mpower8vector},
+@option{mcrypto}, @option{mhtm}, @option{mquadmemory}, and
+@option{mquadmemoryatomic} options.
+
+This section intentionally empty.
+
+@node Basic PowerPC Builtin Functions Available on ISA 3.0
+@subsubsection Basic PowerPC Builtin Functions Available on ISA 3.0
+
+The basic builtin functions described in this section are
+available on the PowerPC family of processors starting with ISA 3.0
+or later. Unless specific options are explicitly disabled on the
+command line, specifying option @option{mcpu=power9} has the effect of
+enabling all the same options as for @option{mcpu=power8} in
+addition to the @option{misel} option.
+
The following builtin functions are available on Linux 64bit systems
that use the ISA 3.0 instruction set.
+that use the ISA 3.0 instruction set (@option{mcpu=power9}):
@table @code
@item __float128 __builtin_sqrtf128 (__float128)
Perform a 128bit IEEE floating point square root operation.
@findex __builtin_sqrtf128

@item __float128 __builtin_fmaf128 (__float128, __float128, __float128)
Perform a 128bit IEEE floating point fused multiply and add operation.
@findex __builtin_fmaf128

@item __float128 __builtin_addf128_round_to_odd (__float128, __float128)
Perform a 128bit IEEE floating point add using round to odd as the
rounding mode.
@@ 15802,7 +15926,7 @@
as the rounding mode.
@findex __builtin_sqrtf128_round_to_odd
@item __float128 __builtin_fmaf128 (__float128, __float128, __float128)
+@item __float128 __builtin_fmaf128_round_to_odd (__float128, __float128, __float128)
Perform a 128bit IEEE floating point fused multiply and add operation
using round to odd as the rounding mode.
@findex __builtin_fmaf128_round_to_odd
@@ 15813,78 +15937,26 @@
@findex __builtin_truncf128_round_to_odd
@end table
The following builtin functions are available for the PowerPC family
of processors, starting with ISA 2.05 or later (@option{mcpu=power6}
or @option{mcmpb}):
+The following additional builtin functions are also available for the
+PowerPC family of processors, starting with ISA 3.0 or later:
@smallexample
unsigned long long __builtin_cmpb (unsigned long long int, unsigned long long int);
unsigned int __builtin_cmpb (unsigned int, unsigned int);
@end smallexample

The @code{__builtin_cmpb} function
performs a bytewise compare on the contents of its two arguments,
returning the result of the bytewise comparison as the returned
value. For each byte comparison, the corresponding byte of the return
value holds 0xff if the input bytes are equal and 0 if the input bytes
are not equal. If either of the arguments to this builtin function
is wider than 32 bits, the function call expands into the form that
expects @code{unsigned long long int} arguments
which is only available on 64bit targets.

The following builtin functions are available for the PowerPC family
of processors, starting with ISA 2.06 or later (@option{mcpu=power7}
or @option{mpopcntd}):
@smallexample
long __builtin_bpermd (long, long);
int __builtin_divwe (int, int);
unsigned int __builtin_divweu (unsigned int, unsigned int);
long __builtin_divde (long, long);
unsigned long __builtin_divdeu (unsigned long, unsigned long);
unsigned int cdtbcd (unsigned int);
unsigned int cbcdtd (unsigned int);
unsigned int addg6s (unsigned int, unsigned int);
void __builtin_rs6000_speculation_barrier (void);
@end smallexample

The @code{__builtin_divde} and @code{__builtin_divdeu} functions
require a 64bit environment supporting ISA 2.06 or later.

The following builtin functions are available for the PowerPC family
of processors, starting with ISA 3.0 or later (@option{mcpu=power9}):
@smallexample
long long __builtin_darn (void);
long long __builtin_darn_raw (void);
int __builtin_darn_32 (void);
+@end smallexample
unsigned int scalar_extract_exp (double source);
unsigned long long int scalar_extract_exp (__ieee128 source);
+The @code{__builtin_darn} and @code{__builtin_darn_raw}
+functions require a
+64bit environment supporting ISA 3.0 or later.
+The @code{__builtin_darn} function provides a 64bit conditioned
+random number. The @code{__builtin_darn_raw} function provides a
+64bit raw random number. The @code{__builtin_darn_32} function
+provides a 32bit conditioned random number.
unsigned long long int scalar_extract_sig (double source);
unsigned __int128 scalar_extract_sig (__ieee128 source);
+The following additional builtin functions are also available for the
+PowerPC family of processors, starting with ISA 3.0 or later:
double
scalar_insert_exp (unsigned long long int significand, unsigned long long int exponent);
double
scalar_insert_exp (double significand, unsigned long long int exponent);

ieee_128
scalar_insert_exp (unsigned __int128 significand, unsigned long long int exponent);
ieee_128
scalar_insert_exp (ieee_128 significand, unsigned long long int exponent);

int scalar_cmp_exp_gt (double arg1, double arg2);
int scalar_cmp_exp_lt (double arg1, double arg2);
int scalar_cmp_exp_eq (double arg1, double arg2);
int scalar_cmp_exp_unordered (double arg1, double arg2);

bool scalar_test_data_class (float source, const int condition);
bool scalar_test_data_class (double source, const int condition);
bool scalar_test_data_class (__ieee128 source, const int condition);

bool scalar_test_neg (float source);
bool scalar_test_neg (double source);
bool scalar_test_neg (__ieee128 source);

+@smallexample
int __builtin_byte_in_set (unsigned char u, unsigned long long set);
int __builtin_byte_in_range (unsigned char u, unsigned int range);
int __builtin_byte_in_either_range (unsigned char u, unsigned int ranges);
@@ 15909,81 +15981,6 @@
int __builtin_dfp_dtstsfi_ov_dd (unsigned int comparison, _Decimal64 value);
int __builtin_dfp_dtstsfi_ov_td (unsigned int comparison, _Decimal128 value);
@end smallexample

The @code{__builtin_darn} and @code{__builtin_darn_raw}
functions require a
64bit environment supporting ISA 3.0 or later.
The @code{__builtin_darn} function provides a 64bit conditioned
random number. The @code{__builtin_darn_raw} function provides a
64bit raw random number. The @code{__builtin_darn_32} function
provides a 32bit random number.

The @code{scalar_extract_exp} and @code{scalar_extract_sig}
functions require a 64bit environment supporting ISA 3.0 or later.
The @code{scalar_extract_exp} and @code{scalar_extract_sig} builtin
functions return the significand and the biased exponent value
respectively of their @code{source} arguments.
When supplied with a 64bit @code{source} argument, the
result returned by @code{scalar_extract_sig} has
the @code{0x0010000000000000} bit set if the
function's @code{source} argument is in normalized form.
Otherwise, this bit is set to 0.
When supplied with a 128bit @code{source} argument, the
@code{0x00010000000000000000000000000000} bit of the result is
treated similarly.
Note that the sign of the significand is not represented in the result
returned from the @code{scalar_extract_sig} function. Use the
@code{scalar_test_neg} function to test the sign of its @code{double}
argument.

The @code{scalar_insert_exp}
functions require a 64bit environment supporting ISA 3.0 or later.
When supplied with a 64bit first argument, the
@code{scalar_insert_exp} builtin function returns a doubleprecision
floating point value that is constructed by assembling the values of its
@code{significand} and @code{exponent} arguments. The sign of the
result is copied from the most significant bit of the
@code{significand} argument. The significand and exponent components
of the result are composed of the least significant 11 bits of the
@code{exponent} argument and the least significant 52 bits of the
@code{significand} argument respectively.

When supplied with a 128bit first argument, the
@code{scalar_insert_exp} builtin function returns a quadprecision
ieee floating point value. The sign bit of the result is copied from
the most significant bit of the @code{significand} argument.
The significand and exponent components of the result are composed of
the least significant 15 bits of the @code{exponent} argument and the
least significant 112 bits of the @code{significand} argument respectively.

The @code{scalar_cmp_exp_gt}, @code{scalar_cmp_exp_lt},
@code{scalar_cmp_exp_eq}, and @code{scalar_cmp_exp_unordered} builtin
functions return a nonzero value if @code{arg1} is greater than, less
than, equal to, or not comparable to @code{arg2} respectively. The
arguments are not comparable if one or the other equals NaN (not a
number).

The @code{scalar_test_data_class} builtin function returns 1
if any of the condition tests enabled by the value of the
@code{condition} variable are true, and 0 otherwise. The
@code{condition} argument must be a compiletime constant integer with
value not exceeding 127. The
@code{condition} argument is encoded as a bitmask with each bit
enabling the testing of a different condition, as characterized by the
following:
@smallexample
0x40 Test for NaN
0x20 Test for +Infinity
0x10 Test for Infinity
0x08 Test for +Zero
0x04 Test for Zero
0x02 Test for +Denormal
0x01 Test for Denormal
@end smallexample

The @code{scalar_test_neg} builtin function returns 1 if its
@code{source} argument holds a negative value, 0 otherwise.

The @code{__builtin_byte_in_set} function requires a
64bit environment supporting ISA 3.0 or later. This function returns
a nonzero value if and only if its @code{u} argument exactly equals one of
@@ 16034,241 +16031,8 @@
require that the type of the @code{value} argument be
@code{__Decimal64} and @code{__Decimal128} respectively.
The following builtin functions are also available for the PowerPC family
of processors, starting with ISA 3.0 or later
(@option{mcpu=power9}). These string functions are described
separately in order to group the descriptions closer to the function
prototypes:
@smallexample
int vec_all_nez (vector signed char, vector signed char);
int vec_all_nez (vector unsigned char, vector unsigned char);
int vec_all_nez (vector signed short, vector signed short);
int vec_all_nez (vector unsigned short, vector unsigned short);
int vec_all_nez (vector signed int, vector signed int);
int vec_all_nez (vector unsigned int, vector unsigned int);
int vec_any_eqz (vector signed char, vector signed char);
int vec_any_eqz (vector unsigned char, vector unsigned char);
int vec_any_eqz (vector signed short, vector signed short);
int vec_any_eqz (vector unsigned short, vector unsigned short);
int vec_any_eqz (vector signed int, vector signed int);
int vec_any_eqz (vector unsigned int, vector unsigned int);
vector bool char vec_cmpnez (vector signed char arg1, vector signed char arg2);
vector bool char vec_cmpnez (vector unsigned char arg1, vector unsigned char arg2);
vector bool short vec_cmpnez (vector signed short arg1, vector signed short arg2);
vector bool short vec_cmpnez (vector unsigned short arg1, vector unsigned short arg2);
vector bool int vec_cmpnez (vector signed int arg1, vector signed int arg2);
vector bool int vec_cmpnez (vector unsigned int, vector unsigned int);

vector signed char vec_cnttz (vector signed char);
vector unsigned char vec_cnttz (vector unsigned char);
vector signed short vec_cnttz (vector signed short);
vector unsigned short vec_cnttz (vector unsigned short);
vector signed int vec_cnttz (vector signed int);
vector unsigned int vec_cnttz (vector unsigned int);
vector signed long long vec_cnttz (vector signed long long);
vector unsigned long long vec_cnttz (vector unsigned long long);

signed int vec_cntlz_lsbb (vector signed char);
signed int vec_cntlz_lsbb (vector unsigned char);

signed int vec_cnttz_lsbb (vector signed char);
signed int vec_cnttz_lsbb (vector unsigned char);

unsigned int vec_first_match_index (vector signed char, vector signed char);
unsigned int vec_first_match_index (vector unsigned char,
 vector unsigned char);
unsigned int vec_first_match_index (vector signed int, vector signed int);
unsigned int vec_first_match_index (vector unsigned int, vector unsigned int);
unsigned int vec_first_match_index (vector signed short, vector signed short);
unsigned int vec_first_match_index (vector unsigned short,
 vector unsigned short);
unsigned int vec_first_match_or_eos_index (vector signed char,
 vector signed char);
unsigned int vec_first_match_or_eos_index (vector unsigned char,
 vector unsigned char);
unsigned int vec_first_match_or_eos_index (vector signed int,
 vector signed int);
unsigned int vec_first_match_or_eos_index (vector unsigned int,
 vector unsigned int);
unsigned int vec_first_match_or_eos_index (vector signed short,
 vector signed short);
unsigned int vec_first_match_or_eos_index (vector unsigned short,
 vector unsigned short);
unsigned int vec_first_mismatch_index (vector signed char,
 vector signed char);
unsigned int vec_first_mismatch_index (vector unsigned char,
 vector unsigned char);
unsigned int vec_first_mismatch_index (vector signed int,
 vector signed int);
unsigned int vec_first_mismatch_index (vector unsigned int,
 vector unsigned int);
unsigned int vec_first_mismatch_index (vector signed short,
 vector signed short);
unsigned int vec_first_mismatch_index (vector unsigned short,
 vector unsigned short);
unsigned int vec_first_mismatch_or_eos_index (vector signed char,
 vector signed char);
unsigned int vec_first_mismatch_or_eos_index (vector unsigned char,
 vector unsigned char);
unsigned int vec_first_mismatch_or_eos_index (vector signed int,
 vector signed int);
unsigned int vec_first_mismatch_or_eos_index (vector unsigned int,
 vector unsigned int);
unsigned int vec_first_mismatch_or_eos_index (vector signed short,
 vector signed short);
unsigned int vec_first_mismatch_or_eos_index (vector unsigned short,
 vector unsigned short);

vector unsigned short vec_pack_to_short_fp32 (vector float, vector float);

vector signed char vec_xl_be (signed long long, signed char *);
vector unsigned char vec_xl_be (signed long long, unsigned char *);
vector signed int vec_xl_be (signed long long, signed int *);
vector unsigned int vec_xl_be (signed long long, unsigned int *);
vector signed __int128 vec_xl_be (signed long long, signed __int128 *);
vector unsigned __int128 vec_xl_be (signed long long, unsigned __int128 *);
vector signed long long vec_xl_be (signed long long, signed long long *);
vector unsigned long long vec_xl_be (signed long long, unsigned long long *);
vector signed short vec_xl_be (signed long long, signed short *);
vector unsigned short vec_xl_be (signed long long, unsigned short *);
vector double vec_xl_be (signed long long, double *);
vector float vec_xl_be (signed long long, float *);

vector signed char vec_xl_len (signed char *addr, size_t len);
vector unsigned char vec_xl_len (unsigned char *addr, size_t len);
vector signed int vec_xl_len (signed int *addr, size_t len);
vector unsigned int vec_xl_len (unsigned int *addr, size_t len);
vector signed __int128 vec_xl_len (signed __int128 *addr, size_t len);
vector unsigned __int128 vec_xl_len (unsigned __int128 *addr, size_t len);
vector signed long long vec_xl_len (signed long long *addr, size_t len);
vector unsigned long long vec_xl_len (unsigned long long *addr, size_t len);
vector signed short vec_xl_len (signed short *addr, size_t len);
vector unsigned short vec_xl_len (unsigned short *addr, size_t len);
vector double vec_xl_len (double *addr, size_t len);
vector float vec_xl_len (float *addr, size_t len);

vector unsigned char vec_xl_len_r (unsigned char *addr, size_t len);

void vec_xst_len (vector signed char data, signed char *addr, size_t len);
void vec_xst_len (vector unsigned char data, unsigned char *addr, size_t len);
void vec_xst_len (vector signed int data, signed int *addr, size_t len);
void vec_xst_len (vector unsigned int data, unsigned int *addr, size_t len);
void vec_xst_len (vector unsigned __int128 data, unsigned __int128 *addr, size_t len);
void vec_xst_len (vector signed long long data, signed long long *addr, size_t len);
void vec_xst_len (vector unsigned long long data, unsigned long long *addr, size_t len);
void vec_xst_len (vector signed short data, signed short *addr, size_t len);
void vec_xst_len (vector unsigned short data, unsigned short *addr, size_t len);
void vec_xst_len (vector signed __int128 data, signed __int128 *addr, size_t len);
void vec_xst_len (vector double data, double *addr, size_t len);
void vec_xst_len (vector float data, float *addr, size_t len);

void vec_xst_len_r (vector unsigned char data, unsigned char *addr, size_t len);

signed char vec_xlx (unsigned int index, vector signed char data);
unsigned char vec_xlx (unsigned int index, vector unsigned char data);
signed short vec_xlx (unsigned int index, vector signed short data);
unsigned short vec_xlx (unsigned int index, vector unsigned short data);
signed int vec_xlx (unsigned int index, vector signed int data);
unsigned int vec_xlx (unsigned int index, vector unsigned int data);
float vec_xlx (unsigned int index, vector float data);

signed char vec_xrx (unsigned int index, vector signed char data);
unsigned char vec_xrx (unsigned int index, vector unsigned char data);
signed short vec_xrx (unsigned int index, vector signed short data);
unsigned short vec_xrx (unsigned int index, vector unsigned short data);
signed int vec_xrx (unsigned int index, vector signed int data);
unsigned int vec_xrx (unsigned int index, vector unsigned int data);
float vec_xrx (unsigned int index, vector float data);
@end smallexample

The @code{vec_all_nez}, @code{vec_any_eqz}, and @code{vec_cmpnez}
perform pairwise comparisons between the elements at the same
positions within their two vector arguments.
The @code{vec_all_nez} function returns a
nonzero value if and only if all pairwise comparisons are not
equal and no element of either vector argument contains a zero.
The @code{vec_any_eqz} function returns a
nonzero value if and only if at least one pairwise comparison is equal
or if at least one element of either vector argument contains a zero.
The @code{vec_cmpnez} function returns a vector of the same type as
its two arguments, within which each element consists of all ones to
denote that either the corresponding elements of the incoming arguments are
not equal or that at least one of the corresponding elements contains
zero. Otherwise, the element of the returned vector contains all zeros.

The @code{vec_cntlz_lsbb} function returns the count of the number of
consecutive leading byte elements (starting from position 0 within the
supplied vector argument) for which the leastsignificant bit
equals zero. The @code{vec_cnttz_lsbb} function returns the count of
the number of consecutive trailing byte elements (starting from
position 15 and counting backwards within the supplied vector
argument) for which the leastsignificant bit equals zero.

The @code{vec_xl_len} and @code{vec_xst_len} functions require a
64bit environment supporting ISA 3.0 or later. The @code{vec_xl_len}
function loads a variable length vector from memory. The
@code{vec_xst_len} function stores a variable length vector to memory.
With both the @code{vec_xl_len} and @code{vec_xst_len} functions, the
@code{addr} argument represents the memory address to or from which
data will be transferred, and the
@code{len} argument represents the number of bytes to be
transferred, as computed by the C expression @code{min((len & 0xff), 16)}.
If this expression's value is not a multiple of the vector element's
size, the behavior of this function is undefined.
In the case that the underlying computer is configured to run in
bigendian mode, the data transfer moves bytes 0 to @code{(len  1)} of
the corresponding vector. In littleendian mode, the data transfer
moves bytes @code{(16  len)} to @code{15} of the corresponding
vector. For the load function, any bytes of the result vector that
are not loaded from memory are set to zero.
The value of the @code{addr} argument need not be aligned on a
multiple of the vector's element size.

The @code{vec_xlx} and @code{vec_xrx} functions extract the single
element selected by the @code{index} argument from the vector
represented by the @code{data} argument. The @code{index} argument
always specifies a byte offset, regardless of the size of the vector
element. With @code{vec_xlx}, @code{index} is the offset of the first
byte of the element to be extracted. With @code{vec_xrx}, @code{index}
represents the last byte of the element to be extracted, measured
from the right end of the vector. In other words, the last byte of
the element to be extracted is found at position @code{(15  index)}.
There is no requirement that @code{index} be a multiple of the vector
element size. However, if the size of the vector element added to
@code{index} is greater than 15, the content of the returned value is
undefined.

The following builtin functions are available for the PowerPC family
of processors when hardware decimal floating point
(@option{mharddfp}) is available:
@smallexample
long long __builtin_dxex (_Decimal64);
long long __builtin_dxexq (_Decimal128);
_Decimal64 __builtin_ddedpd (int, _Decimal64);
_Decimal128 __builtin_ddedpdq (int, _Decimal128);
_Decimal64 __builtin_denbcd (int, _Decimal64);
_Decimal128 __builtin_denbcdq (int, _Decimal128);
_Decimal64 __builtin_diex (long long, _Decimal64);
_Decimal128 _builtin_diexq (long long, _Decimal128);
_Decimal64 __builtin_dscli (_Decimal64, int);
_Decimal128 __builtin_dscliq (_Decimal128, int);
_Decimal64 __builtin_dscri (_Decimal64, int);
_Decimal128 __builtin_dscriq (_Decimal128, int);
unsigned long long __builtin_unpack_dec128 (_Decimal128, int);
_Decimal128 __builtin_pack_dec128 (unsigned long long, unsigned long long);
@end smallexample

The following builtin functions are available for the PowerPC family
of processors when the Vector Scalar (vsx) instruction set is
available:
@smallexample
unsigned long long __builtin_unpack_vector_int128 (vector __int128_t, int);
vector __int128_t __builtin_pack_vector_int128 (unsigned long long,
 unsigned long long);
@end smallexample

@node PowerPC AltiVec/VSX Builtin Functions
@subsection PowerPC AltiVec Builtin Functions
@@ 19040,6 +18804,312 @@
int __builtin_bcdsub_ov (vector __int128_t, vector __int128_t);
@end smallexample
+The following additional builtin functions are also available for the
+PowerPC family of processors, starting with ISA 3.0
+(@option{mcpu=power9}) or later:
+@smallexample
+unsigned int scalar_extract_exp (double source);
+unsigned long long int scalar_extract_exp (__ieee128 source);
+
+unsigned long long int scalar_extract_sig (double source);
+unsigned __int128 scalar_extract_sig (__ieee128 source);
+
+double
+scalar_insert_exp (unsigned long long int significand, unsigned long long int exponent);
+double
+scalar_insert_exp (double significand, unsigned long long int exponent);
+
+ieee_128
+scalar_insert_exp (unsigned __int128 significand, unsigned long long int exponent);
+ieee_128
+scalar_insert_exp (ieee_128 significand, unsigned long long int exponent);
+
+int scalar_cmp_exp_gt (double arg1, double arg2);
+int scalar_cmp_exp_lt (double arg1, double arg2);
+int scalar_cmp_exp_eq (double arg1, double arg2);
+int scalar_cmp_exp_unordered (double arg1, double arg2);
+
+bool scalar_test_data_class (float source, const int condition);
+bool scalar_test_data_class (double source, const int condition);
+bool scalar_test_data_class (__ieee128 source, const int condition);
+
+bool scalar_test_neg (float source);
+bool scalar_test_neg (double source);
+bool scalar_test_neg (__ieee128 source);
+@end smallexample
+
+The @code{scalar_extract_exp} and @code{scalar_extract_sig}
+functions require a 64bit environment supporting ISA 3.0 or later.
+The @code{scalar_extract_exp} and @code{scalar_extract_sig} builtin
+functions return the significand and the biased exponent value
+respectively of their @code{source} arguments.
+When supplied with a 64bit @code{source} argument, the
+result returned by @code{scalar_extract_sig} has
+the @code{0x0010000000000000} bit set if the
+function's @code{source} argument is in normalized form.
+Otherwise, this bit is set to 0.
+When supplied with a 128bit @code{source} argument, the
+@code{0x00010000000000000000000000000000} bit of the result is
+treated similarly.
+Note that the sign of the significand is not represented in the result
+returned from the @code{scalar_extract_sig} function. Use the
+@code{scalar_test_neg} function to test the sign of its @code{double}
+argument.
+
+The @code{scalar_insert_exp}
+functions require a 64bit environment supporting ISA 3.0 or later.
+When supplied with a 64bit first argument, the
+@code{scalar_insert_exp} builtin function returns a doubleprecision
+floating point value that is constructed by assembling the values of its
+@code{significand} and @code{exponent} arguments. The sign of the
+result is copied from the most significant bit of the
+@code{significand} argument. The significand and exponent components
+of the result are composed of the least significant 11 bits of the
+@code{exponent} argument and the least significant 52 bits of the
+@code{significand} argument respectively.
+
+When supplied with a 128bit first argument, the
+@code{scalar_insert_exp} builtin function returns a quadprecision
+ieee floating point value. The sign bit of the result is copied from
+the most significant bit of the @code{significand} argument.
+The significand and exponent components of the result are composed of
+the least significant 15 bits of the @code{exponent} argument and the
+least significant 112 bits of the @code{significand} argument respectively.
+
+The @code{scalar_cmp_exp_gt}, @code{scalar_cmp_exp_lt},
+@code{scalar_cmp_exp_eq}, and @code{scalar_cmp_exp_unordered} builtin
+functions return a nonzero value if @code{arg1} is greater than, less
+than, equal to, or not comparable to @code{arg2} respectively. The
+arguments are not comparable if one or the other equals NaN (not a
+number).
+
+The @code{scalar_test_data_class} builtin function returns 1
+if any of the condition tests enabled by the value of the
+@code{condition} variable are true, and 0 otherwise. The
+@code{condition} argument must be a compiletime constant integer with
+value not exceeding 127. The
+@code{condition} argument is encoded as a bitmask with each bit
+enabling the testing of a different condition, as characterized by the
+following:
+@smallexample
+0x40 Test for NaN
+0x20 Test for +Infinity
+0x10 Test for Infinity
+0x08 Test for +Zero
+0x04 Test for Zero
+0x02 Test for +Denormal
+0x01 Test for Denormal
+@end smallexample
+
+The @code{scalar_test_neg} builtin function returns 1 if its
+@code{source} argument holds a negative value, 0 otherwise.
+
+The following builtin functions are also available for the PowerPC family
+of processors, starting with ISA 3.0 or later
+(@option{mcpu=power9}). These string functions are described
+separately in order to group the descriptions closer to the function
+prototypes:
+@smallexample
+int vec_all_nez (vector signed char, vector signed char);
+int vec_all_nez (vector unsigned char, vector unsigned char);
+int vec_all_nez (vector signed short, vector signed short);
+int vec_all_nez (vector unsigned short, vector unsigned short);
+int vec_all_nez (vector signed int, vector signed int);
+int vec_all_nez (vector unsigned int, vector unsigned int);
+
+int vec_any_eqz (vector signed char, vector signed char);
+int vec_any_eqz (vector unsigned char, vector unsigned char);
+int vec_any_eqz (vector signed short, vector signed short);
+int vec_any_eqz (vector unsigned short, vector unsigned short);
+int vec_any_eqz (vector signed int, vector signed int);
+int vec_any_eqz (vector unsigned int, vector unsigned int);
+
+vector bool char vec_cmpnez (vector signed char arg1, vector signed char arg2);
+vector bool char vec_cmpnez (vector unsigned char arg1, vector unsigned char arg2);
+vector bool short vec_cmpnez (vector signed short arg1, vector signed short arg2);
+vector bool short vec_cmpnez (vector unsigned short arg1, vector unsigned short arg2);
+vector bool int vec_cmpnez (vector signed int arg1, vector signed int arg2);
+vector bool int vec_cmpnez (vector unsigned int, vector unsigned int);
+
+vector signed char vec_cnttz (vector signed char);
+vector unsigned char vec_cnttz (vector unsigned char);
+vector signed short vec_cnttz (vector signed short);
+vector unsigned short vec_cnttz (vector unsigned short);
+vector signed int vec_cnttz (vector signed int);
+vector unsigned int vec_cnttz (vector unsigned int);
+vector signed long long vec_cnttz (vector signed long long);
+vector unsigned long long vec_cnttz (vector unsigned long long);
+
+signed int vec_cntlz_lsbb (vector signed char);
+signed int vec_cntlz_lsbb (vector unsigned char);
+
+signed int vec_cnttz_lsbb (vector signed char);
+signed int vec_cnttz_lsbb (vector unsigned char);
+
+unsigned int vec_first_match_index (vector signed char, vector signed char);
+unsigned int vec_first_match_index (vector unsigned char,
+ vector unsigned char);
+unsigned int vec_first_match_index (vector signed int, vector signed int);
+unsigned int vec_first_match_index (vector unsigned int, vector unsigned int);
+unsigned int vec_first_match_index (vector signed short, vector signed short);
+unsigned int vec_first_match_index (vector unsigned short,
+ vector unsigned short);
+unsigned int vec_first_match_or_eos_index (vector signed char,
+ vector signed char);
+unsigned int vec_first_match_or_eos_index (vector unsigned char,
+ vector unsigned char);
+unsigned int vec_first_match_or_eos_index (vector signed int,
+ vector signed int);
+unsigned int vec_first_match_or_eos_index (vector unsigned int,
+ vector unsigned int);
+unsigned int vec_first_match_or_eos_index (vector signed short,
+ vector signed short);
+unsigned int vec_first_match_or_eos_index (vector unsigned short,
+ vector unsigned short);
+unsigned int vec_first_mismatch_index (vector signed char,
+ vector signed char);
+unsigned int vec_first_mismatch_index (vector unsigned char,
+ vector unsigned char);
+unsigned int vec_first_mismatch_index (vector signed int,
+ vector signed int);
+unsigned int vec_first_mismatch_index (vector unsigned int,
+ vector unsigned int);
+unsigned int vec_first_mismatch_index (vector signed short,
+ vector signed short);
+unsigned int vec_first_mismatch_index (vector unsigned short,
+ vector unsigned short);
+unsigned int vec_first_mismatch_or_eos_index (vector signed char,
+ vector signed char);
+unsigned int vec_first_mismatch_or_eos_index (vector unsigned char,
+ vector unsigned char);
+unsigned int vec_first_mismatch_or_eos_index (vector signed int,
+ vector signed int);
+unsigned int vec_first_mismatch_or_eos_index (vector unsigned int,
+ vector unsigned int);
+unsigned int vec_first_mismatch_or_eos_index (vector signed short,
+ vector signed short);
+unsigned int vec_first_mismatch_or_eos_index (vector unsigned short,
+ vector unsigned short);
+
+vector unsigned short vec_pack_to_short_fp32 (vector float, vector float);
+
+vector signed char vec_xl_be (signed long long, signed char *);
+vector unsigned char vec_xl_be (signed long long, unsigned char *);
+vector signed int vec_xl_be (signed long long, signed int *);
+vector unsigned int vec_xl_be (signed long long, unsigned int *);
+vector signed __int128 vec_xl_be (signed long long, signed __int128 *);
+vector unsigned __int128 vec_xl_be (signed long long, unsigned __int128 *);
+vector signed long long vec_xl_be (signed long long, signed long long *);
+vector unsigned long long vec_xl_be (signed long long, unsigned long long *);
+vector signed short vec_xl_be (signed long long, signed short *);
+vector unsigned short vec_xl_be (signed long long, unsigned short *);
+vector double vec_xl_be (signed long long, double *);
+vector float vec_xl_be (signed long long, float *);
+
+vector signed char vec_xl_len (signed char *addr, size_t len);
+vector unsigned char vec_xl_len (unsigned char *addr, size_t len);
+vector signed int vec_xl_len (signed int *addr, size_t len);
+vector unsigned int vec_xl_len (unsigned int *addr, size_t len);
+vector signed __int128 vec_xl_len (signed __int128 *addr, size_t len);
+vector unsigned __int128 vec_xl_len (unsigned __int128 *addr, size_t len);
+vector signed long long vec_xl_len (signed long long *addr, size_t len);
+vector unsigned long long vec_xl_len (unsigned long long *addr, size_t len);
+vector signed short vec_xl_len (signed short *addr, size_t len);
+vector unsigned short vec_xl_len (unsigned short *addr, size_t len);
+vector double vec_xl_len (double *addr, size_t len);
+vector float vec_xl_len (float *addr, size_t len);
+
+vector unsigned char vec_xl_len_r (unsigned char *addr, size_t len);
+
+void vec_xst_len (vector signed char data, signed char *addr, size_t len);
+void vec_xst_len (vector unsigned char data, unsigned char *addr, size_t len);
+void vec_xst_len (vector signed int data, signed int *addr, size_t len);
+void vec_xst_len (vector unsigned int data, unsigned int *addr, size_t len);
+void vec_xst_len (vector unsigned __int128 data, unsigned __int128 *addr, size_t len);
+void vec_xst_len (vector signed long long data, signed long long *addr, size_t len);
+void vec_xst_len (vector unsigned long long data, unsigned long long *addr, size_t len);
+void vec_xst_len (vector signed short data, signed short *addr, size_t len);
+void vec_xst_len (vector unsigned short data, unsigned short *addr, size_t len);
+void vec_xst_len (vector signed __int128 data, signed __int128 *addr, size_t len);
+void vec_xst_len (vector double data, double *addr, size_t len);
+void vec_xst_len (vector float data, float *addr, size_t len);
+
+void vec_xst_len_r (vector unsigned char data, unsigned char *addr, size_t len);
+
+signed char vec_xlx (unsigned int index, vector signed char data);
+unsigned char vec_xlx (unsigned int index, vector unsigned char data);
+signed short vec_xlx (unsigned int index, vector signed short data);
+unsigned short vec_xlx (unsigned int index, vector unsigned short data);
+signed int vec_xlx (unsigned int index, vector signed int data);
+unsigned int vec_xlx (unsigned int index, vector unsigned int data);
+float vec_xlx (unsigned int index, vector float data);
+
+signed char vec_xrx (unsigned int index, vector signed char data);
+unsigned char vec_xrx (unsigned int index, vector unsigned char data);
+signed short vec_xrx (unsigned int index, vector signed short data);
+unsigned short vec_xrx (unsigned int index, vector unsigned short data);
+signed int vec_xrx (unsigned int index, vector signed int data);
+unsigned int vec_xrx (unsigned int index, vector unsigned int data);
+float vec_xrx (unsigned int index, vector float data);
+@end smallexample
+
+The @code{vec_all_nez}, @code{vec_any_eqz}, and @code{vec_cmpnez}
+perform pairwise comparisons between the elements at the same
+positions within their two vector arguments.
+The @code{vec_all_nez} function returns a
+nonzero value if and only if all pairwise comparisons are not
+equal and no element of either vector argument contains a zero.
+The @code{vec_any_eqz} function returns a
+nonzero value if and only if at least one pairwise comparison is equal
+or if at least one element of either vector argument contains a zero.
+The @code{vec_cmpnez} function returns a vector of the same type as
+its two arguments, within which each element consists of all ones to
+denote that either the corresponding elements of the incoming arguments are
+not equal or that at least one of the corresponding elements contains
+zero. Otherwise, the element of the returned vector contains all zeros.
+
+The @code{vec_cntlz_lsbb} function returns the count of the number of
+consecutive leading byte elements (starting from position 0 within the
+supplied vector argument) for which the leastsignificant bit
+equals zero. The @code{vec_cnttz_lsbb} function returns the count of
+the number of consecutive trailing byte elements (starting from
+position 15 and counting backwards within the supplied vector
+argument) for which the leastsignificant bit equals zero.
+
+The @code{vec_xl_len} and @code{vec_xst_len} functions require a
+64bit environment supporting ISA 3.0 or later. The @code{vec_xl_len}
+function loads a variable length vector from memory. The
+@code{vec_xst_len} function stores a variable length vector to memory.
+With both the @code{vec_xl_len} and @code{vec_xst_len} functions, the
+@code{addr} argument represents the memory address to or from which
+data will be transferred, and the
+@code{len} argument represents the number of bytes to be
+transferred, as computed by the C expression @code{min((len & 0xff), 16)}.
+If this expression's value is not a multiple of the vector element's
+size, the behavior of this function is undefined.
+In the case that the underlying computer is configured to run in
+bigendian mode, the data transfer moves bytes 0 to @code{(len  1)} of
+the corresponding vector. In littleendian mode, the data transfer
+moves bytes @code{(16  len)} to @code{15} of the corresponding
+vector. For the load function, any bytes of the result vector that
+are not loaded from memory are set to zero.
+The value of the @code{addr} argument need not be aligned on a
+multiple of the vector's element size.
+
+The @code{vec_xlx} and @code{vec_xrx} functions extract the single
+element selected by the @code{index} argument from the vector
+represented by the @code{data} argument. The @code{index} argument
+always specifies a byte offset, regardless of the size of the vector
+element. With @code{vec_xlx}, @code{index} is the offset of the first
+byte of the element to be extracted. With @code{vec_xrx}, @code{index}
+represents the last byte of the element to be extracted, measured
+from the right end of the vector. In other words, the last byte of
+the element to be extracted is found at position @code{(15  index)}.
+There is no requirement that @code{index} be a multiple of the vector
+element size. However, if the size of the vector element added to
+@code{index} is greater than 15, the content of the returned value is
+undefined.
+
If the ISA 3.0 instruction set additions (@option{mcpu=power9})
are available: